Lantronix SCS1620 Podręcznik Użytkownika Pobierz pdf (Strona 121)

C-1

The serial device ports of the SCSxx05/SCSxx20 products match the RJ45

pinouts of the console ports of many popular devices found in a network

environment. The SCS uses conventional Category 5 fully pinned network cables

for all connections; the cables are available from Lantronix in various lengths.

In some cases you will need an adaptor for your serial devices. Lantronix offers a

variety of RJ45 to serial-connector adapters for many devices. These adapters

convert the RJ45 connection on the SCS to a 9-pin or 25-pin serial connector

found on some other manufacturer's serial devices.

You can configure the SCSxx05/SCSxx20 device ports as either DTE or DCE

ports, using a software command, thus reducing the issues in making custom-

pinned cables for different devices.

The serial terminal port is wired in the same manner as the device ports and has

the same signal options.

Note: It is generally not necessary to change the configuration of the

terminal port, other than its data rate. Therefore, no options are available

on the setup menu or Web interface for changing its configuration. If you

need to make a change, use the dtedce command to change DTE or

DCE setting, and use the buttons on the front panel to change the baud

rate (see Method #1 – Using the Front Panel Display in the Quick Start

chapter).

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 140 141

Brak uwag

Lantronix SCS1620 Podręcznik Użytkownika Strona 121