Lantronix EDS1100 Podręcznik Użytkownika Pobierz pdf (Strona 40)

7: Network Settings

EDS1100/2100 User Guide 39

4. Click Submit. Changes to the following settings require a reboot for the changes to take

effect:

 BOOTP Client

 DHCP Client

 IP address

 DHCP Client ID

Network 1 Ethernet Link

To display and change settings in the Network 1 Ethernet Link web page, perform the following

steps.

1. Click Network on the Main Menu.

DHCP Client Select On or Off. At boot up the EDS1100/2100 will attempt to lease an IP

address from a DHCP server and maintain the lease at regular intervals.

Note: Overrides BOOTP, the configured IP address, network mask,

gateway, hostname, and domain.

IP Address Enter the EDS1100/2100 static IP address. You may enter it alone, in CIDR

format, or with an explicit mask. The IP address is used if BOOTP and DHCP

are both set to Off. Changing this value requires you to reboot the EDS1100/

2100.

Note: When DHCP is enabled, the EDS1100/2100 tries to obtain an IP

address from DHCP. If it cannot, AutoIP, a server-less method of selecting

the IP address when the DHCP server is unavailable, assigns an address in

the range of 169.254.xxx.xxx.

Default Gateway Enter the IP address of the router for this network. Or clear the field (appears

as <None>). This address is only used for static IP address configuration.

Hostname Enter the EDS1100/2100 hostname. It must begin with a letter, continue with

a sequence of letters, numbers, and/or hyphens, and end with a letter or

number.

Domain Enter the domain name.

DHCP Client ID Enter the ID if the DHCP server uses a DHCP ID. The DHCP server lease

table shows IP addresses and MAC addresses for devices. The lease table

shows the Client ID, in hexadecimal notation, instead of the EDS1100/2100

MAC address.

Primary DNS IP address of the primary name server. This entry is required if you choose to

configure a DNS (Domain Name Server).

Secondary DNS IP address of the secondary DNS.

Table 7-3 Network 1 Interface Configuration Fields (continued)

Field Description

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 156 157

Brak uwag

Lantronix EDS1100 Podręcznik Użytkownika Strona 40