Lantronix EDS1100 Podręcznik Użytkownika Pobierz pdf (Strona 57)

8: Line and Tunnel Settings

EDS1100/2100 User Guide 56

2. Enter or modify the fields in Table 8-17.

Table 8-17 Tunnel Connect Mode Fields

Field Description

Mode Select the method to be used to attempt a connection to a remote host or

device. Choices are:

 Always—A connection is attempted until one is made. If the connection

gets disconnected, the EDS1100/2100 retries until it makes a

connection. (default)

 Disable—An outgoing connection is never attempted.

 Any Character—A connection is attempted when any character is read

on the serial line.

 Start Character—A connection is attempted when the start character

for the selected tunnel is read on the serial line.

 Modem Control Asserted—A connection is attempted as long as the

Modem Control (DSR) is asserted, until a connection is made.

Configure the Modem Control Asserted setting (for DSR or DTR) to start

a connection when the signal is asserted. The EDS1100/2100 will try to

make a connection indefinitely. If the connection closes, it will not make

another connection unless the signal is asserted again.

 Modem Emulation—A connection is attempted when triggered by

modem emulation AT commands.

Note: For the “any character” or “specific character” modes, the

EDS1100/2100 waits and retries the connection. Once it makes a connection

and disconnects, it cannot reconnect until it sees “any character” or the “start

character” again (depending on the configured setting).

Local Port Enter the port for use as the local port. A random port is selected by default.

Once you have configured a number, click the Random link in the Current

Configuration to switch back to random.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 156 157

Brak uwag

Lantronix EDS1100 Podręcznik Użytkownika Strona 57